Details about Sony PS4 Controller Dualshock 4 Wireless Remote For PlayStation 4 Alpine Green. 6 viewed per hour. Sony PS4 Controller Dualshock 4 Wireless Remote For PlayStation 4 Alpine Green. Official PlayStation 4 PS4 Dualshock Wireless Controller 2 CHARGER Jet Black USB. All official PS4 controllers should be able to pair with the official Sony Dualshock 4 USB Wireless Adapter. Mayflash Magic-NS Wireless Adapter & Mayflash Magic-S Wireless Adapter Both of these adapters by Mayflash are affordable and solid third-party wireless adapters that perform almost exactly the same as the official adapter with the added bonus of being able to use either for other types of controllers as well. From the function screen on your PS4 console, select Settings Remote Play Connection Settings Add Device, and a number displays. Launch the Remote Play app on your PC or Mac. Enter the number displayed on the screen of your console to add the device to Remote Play. PS Remote Play is a free to use feature on all PS4 and PS5 consoles. All you need is: Your PS5 or PS5 Digital Edition, PS4 or PS4 Pro 2 connected to your home wired broadband network. A compatible device – also connected to your network. The free PS Remote Play app. A DUALSHOCK 4 wireless controller or DualSense controller 3.
- Dualshock 4 Ps4 Controller
- Ps4 Dualshock 4 Wireless Dongle
- Ps4 Remote Play Dualshock 4 Android 8
- Ps4 Remote Play Dualshock 4 Not Supported
- Ps4 Remote Play Dualshock 4 Ios
- Ps4 Remote Play Dualshock 4 Controller
The Sony PlayStation 4 Dualshock 4 is a very well made controller. It feels solid and has an excellent D-Pad. It has wireless functionality and can charge its internal battery via Micro USB.
There are a few ways to use the Dualshock 4 with the Raspberry Pi:
- USB Cable
The simplest way is to plug in with a Micro USB cable. You could probably buy a very long (3M/10ft) USB cable if you wish to sit a bit back from the screen.
- Sony USB Wireless Adapter
All official PS4 controllers should be able to pair with the official Sony Dualshock 4 USB Wireless Adapter.
- Mayflash Magic-NS Wireless Adapter & Mayflash Magic-S Wireless Adapter
Both of these adapters by Mayflash are affordable and solid third-party wireless adapters that perform almost exactly the same as the official adapter with the added bonus of being able to use either for other types of controllers as well. However, their method of d-pad input does not work with PPSSPP for PSP emulation.
- Bluetooth
If you wish to use either a USB Bluetooth adapter or the Pi 3's built-in Bluetooth then regular Bluetooth pairing in the menu may work, or you may need to use the userspace controller driver calledds4drv
. It depends on your individual controller.
General Controller Usage
Pairing Mode
To put the controller into pairing mode, press and hold the Share button then the PS button.
After a few seconds, the light bar will strobe rapidly and brightly.
The controller is now in pairing mode.
Dualshock 4 Ps4 Controller
To turn the controller off
The controller will not sleep on its own if left idle, it will remain on until the battery goes flat.
To force the controller to go to sleep, hold the PS button for 10 seconds.
Once the light bar turns off, the controller is asleep.
Shutting down your Pi will also turn the controller off.
To wake up the controller
Tap the PS button.
The light bar will turn on. The controller will automatically re-connect to anything it's already been paired to.
To charge the controller
Connect the controller to any USB host (Raspberry Pi, powered USB hub, television USB port) or any USB charger (phone/tablet charger, USB battery, official or aftermarket controller charging station).
The light bar will pulse yellow while charging, and turn off when fully charged.
The Dualshock 4 can charge off either a USB host or a USB charger. It does not need to be connected to a USB host like the Dualshock 3 did.
Usage Methods
USB Cable
Just plug the USB-A into the Raspberry Pi and the Micro USB into the controller. Unity mobile ads. Done.
The light bar will glow dull blue when the controller is in use as a USB device this way.
If you are concerned about power usage, charging the Dualshock battery can use up to 500mA of power.
Sony Dualshock USB Wireless Adapter
This add-on product made by Sony does the Bluetooth pairing in hardware. To the Raspberry Pi and RetroPie, the controller appears as a regular wired USB controller and no additional software setup is required.
One adapter can pair one controller, though multiple adapters can be plugged into the one Pi to allow use of multiple controllers.
To pair the controllers:
- Plug in the USB adapter, it will slowly blink, this is the 'searching' signal
- Push the adapter in more, it moves slightly inwards, and hold for 3 seconds
- The USB adapter blinks faster, this is the 'pairing' signal
- Put the controller into pairing mode with Share and PS
- The USB adapter light and controller light bar will go solid, they are now paired
Repeat with additional adapters and controllers as required.
Regular Bluetooth Pairing
Not all PS4 controllers can be used this way!!!
Try yours and see how it goes. If it doesn't work, then proceed to the next heading about
ds4drv
.- Enter the RetroPie Setup Script
- Configuration / Tools
- 802 - bluetooth (as of RetroPie v4.2, it is now listed as 804 - bluetooth)
- Register and Connect to Bluetooth Device
- Put the controller into pairing mode with Share and PS
- Choose the first/top/default method of pairing in the menu
Once paired, see if EmulationStation will recognise the controller.
If EmulationStation does respond to button presses, lucky you, you're done.
If EmulationStation doesn't respond to button presses, then your controller cannot be used this way. Unpair it and use the
ds4drv
method.![Dualshock Dualshock](/uploads/1/3/7/4/137466347/344942096.jpg)
The reason why all controllers don't work like this is not clear but controller firmware is suspected to be the reason - with 'old' firmware able to be used as a regular Bluetooth controller and 'new' firmware not able to be used this way - however it may also be some other non-obvious reason.
If firmware is the reason, it's likely that System Software 3.50 (April 6th 2016) is the changeover, although it may be an even earlier update.
Userspace Controller Driver (ds4drv)
ds4drv
is a userspace driver which allows the Dualshock 4 to be used when regular Bluetooth does not work.The source code and further description is available at:
- https://github.com/chrippa/ds4drv
Which Bluetooth Adapter To Use
- Pi 1 or Pi 2 or Pi Zero: Use a USB Bluetooth adapter as these models do not have onboard Bluetooth
- Pi 3 with RetroPie 3.7 and later: Use the onboard Bluetooth
- Pi 3 with RetroPie earlier than 3.7: Disable the onboard Bluetooth and use a USB Bluetooth adapter. Onboard BT is disabled by adding
dtoverlay=pi3-disable-bt
to/boot/config.txt
Installation
Install the Python 3 requirements, and then install
ds4drv
with the Python package manager:Allow non-root users to control the
ds4drv
joystick:Test the controller to see if it can connect:
(Note: the
--led 000008
can be omitted or changed to modify the controller light bar color)Put the controller into pairing mode with Share and PS. It should connect to
ds4drv
within a few seconds.Once you have confirmed the controller connects, exit
ds4drv
with Ctrl+c, the controller will disconnect.(Note: Some controllers will require ds4drv but not hidraw to run. If the above command does not work, try running just
ds4drv --led 000008
instead.)Now configure
ds4drv
to run at startup by editing the rc.local
file:After the
# By default this script does nothing.
line, add a new line with the contents:(again, you can remove or change the
--led 000008
as desired)(Note: If you had to drop the --hidraw to test the connection in the previous step, then do not include it in the rc.local file either. Just
/usr/local/bin/ds4drv --led 000008
)The correct complete
rc.local
file will look like:Save this file and quit the text editor.
Turn the controller off by holding the PS button for 10 seconds until the light bar turns off.
Reboot the Pi:
Once RetroPie reboots and is at the EmulationStation screen saying 'No controllers are detected', put the controller into pairing mode with Share and PS. The controller should connect to the
ds4drv
running in the background.If EmulationStation does not recognise the newly-paired controller, then press F4 to quit EmulationStation and run
emulationstation
to restart it, or just reboot your Pi and tap the PS button every few seconds to encourage the controller to re-connect to the ds4drv
instance as soon as it runs.Once EmulationStation recognises the controller, proceed with the usual EmulationStation input setup.
Install [PS Remote Play] on your Windows PC, and then connect to your PS4 console.
Get ready
You’ll need the following to use Remote Play:
Ps4 Dualshock 4 Wireless Dongle
- Windows PC
OS Windows 10 (32-bit or 64-bit) Processor 7th Generation Intel® Core™ processors or later Storage space 100 MB or more RAM 2 GB or more Display resolution 1024 × 768 or higher Sound card Required USB port Required - PS4 console
Always update your PS4 console to the latest version of the system software. - An account for PlayStation™Network
Use the same account that you use for your PS4 console. If you don’t have an account, you’ll need to create one first. - High-speed internet connection
As a standard, we recommend a high-speed connection with upload and download speeds of at least 5 Mbps. For best performance, we recommend a high-speed connection with upload and download speeds of at least 15 Mbps. - DUALSHOCK®4 wireless controller
- USB cable
Connect your Windows PC and your controller with a USB cable. You can also use a DUALSHOCK®4 USB wireless adaptor.
- You can also use your wireless controller for your PS5 console. Connect the controller to your Windows PC using a USB cable.
- To use voice chat, you’ll need a microphone, such as the built-in microphone on your Windows PC.
Install the app
You’ll only need to do these steps the first time you use the app. You can use the same app to connect to your PS4 console and PS5 console.
Download [PS Remote Play] and save it to your desktop or other location.
Read the “SIE application end user license agreement” as well as “Privacy policy”. When you select the checkbox, the download button will become available.
Read the “SIE application end user license agreement” as well as “Privacy policy”. When you select the checkbox, the download button will become available.
Download
During the installation, you might see a request to download additional software that’s needed to use [PS Remote Play]. To download this software, follow the on-screen instructions.
Set up your PS4 console
Set up your PS4 console in the following ways. You’ll only need to do this the first time you use Remote Play:
Ps4 Remote Play Dualshock 4 Android 8
- From the function screen, go to [Settings] > [Remote Play Connection Settings], and then turn on [Enable Remote Play].
- From the function screen, go to [Settings] > [Account Management] > [Activate as Your Primary PS4], and then select [Activate]. You can enable this setting on only one PS4 console for each account. Find out more about activating your PS4 console as your primary console in the PS4 User’s Guide.
- To start Remote Play while your PS4 console is in rest mode, select [Settings] > [Power Save Settings] > [Set Features Available in Rest Mode]. Then select the checkboxes for [Stay Connected to the Internet] and [Enable Turning on PS4 from Network].
Start Remote Play
You’ll take the following steps each time you connect to your PS4 console from your Windows PC.
Ps4 Remote Play Dualshock 4 Not Supported
- 1.
- Turn on your PS4 console or put it into rest mode.
- 2.
- Use a USB cable to connect your controller to your Windows PC.
You can also use a DUALSHOCK®4 USB wireless adaptor. - 3.
- Launch [PS Remote Play] on your Windows PC, and then select [Sign In to PSN].
- 4.
- Sign in with the same account that you use for your PS4 console.
When you select [Settings], you can configure video quality settings for Remote Play such as resolution and frame rate. - 5.
- Select [PS4].
The app searches for the PS4 console that you set up in Set up your PS4 console, and then connects. After it connects, the screen of your PS4 console displays on your Windows PC and you can start using Remote Play.
From the second time onwards, you’ll be able to select the console that you connected to previously.
Ps4 Remote Play Dualshock 4 Ios
- Before trying to connect remotely from outside your home, check that your device connects properly while you are near your PS4 console.
- If the app can’t find the device that you’d like to connect, or if you can’t use Remote Play, see “When Remote Play is not available”.
Remote Play controls
Besides using your controller, you can also control your PS4 console with the control panel.
During Remote Play, if you move the mouse cursor of your Windows PC over the screen that you’re using for Remote Play, the control panel displays:
During Remote Play, if you move the mouse cursor of your Windows PC over the screen that you’re using for Remote Play, the control panel displays:
- SHARE button
Perform the same functions as the controller’s SHARE button. - PS button
Display the home screen of your PS4 console. - OPTIONS button
Perform the same functions as the controller’s OPTIONS button. - Microphone status
Select [Mic on] / [Mic off] to turn the microphone on or off.Mic on Mic off Mic not connected - Battery level
You can check your controller’s battery level. - Screen size
You can change the screen size during Remote Play.Enter full screen Exit full screen
Ps4 Remote Play Dualshock 4 Controller
Quit Remote Play
- 1.
- Click the at the top right corner of the screen you’re using for Remote Play.
You’ll see a message that says “This Remote Play session will be disconnected”.
To quit Remote Play while your PS4 console is in rest mode, select the checkbox for [Put the connected console in rest mode]. - 2.
- Select [OK].
Remote Play quits and the screen returns to its original state before your Windows PC was connected to your PS4 console.
To uninstall [PS Remote Play], go to your Windows PC settings and select [Apps] > [Apps & features], and then delete [PS Remote Play]. Online word document editor free. Folder and command names might vary depending on your OS version.